Siemens SIMATIC S7-1500 Manual page 17

Wiring
3.4 Wiring of the module
4. Tighten the cable tie for the strain relief.
Figure 3-4
5. Plug the SIMATIC TOP connect connecting cables with the 50-pin IDC connector into the
SIMATIC TOP connect connection module.
Additional information
You can find out how to wire the SIMATIC TOP connect connection module in the equipment
manual SIMATIC TOP connect for S7-1500 and ET 200MP
(https://support.industry.siemens.com/cs/ww/en/view/95924607).
16
Fastening the cable tie for the strain relief
Digital output module DQ 64x24VDC/0.3A BA (6ES7522-1BP00-0AA0)
Equipment Manual, 07/2020, A5E48024569-AA