Panasonic FP-D350 Manual page 21

Setting up Print Condition
For Windows 3.1
(2) Functions
No Item
1 4
# * *
N in 1
$
Filing
%
Owner Information
*
&
Security Print
(Filing function and
Network Adapter
Card are installed)
(
Image overlay
(same as above)
∗
Registration procedure of the "Image 1 to 10".
1) Create the image (fixed format) using application software of the PC.
2) Select one of the images from 1 through 10 of the image overlay in the "Advanced functions"
shown in above table.
3) Input the image name.
4) Click "Register".
∗
1 The N in 1 modes must be made at the printer driver screen.
ATTENTION
The collate option must be turned off in the application software.
∗
2 It is not possible to re-save a file if the security print is made.
∗
NOTE
3 It is not possible to save a file if print is made in the image overlay.
∗
4 From two (or four) page documents,
side by side, to 1-sided prints.
Margin Add: Create the margin (8 mm)
Setting
1 in 1, 2 in 1, 4 in 1
Paper Source (Paper size)
Margin (None, Add)
No File
File: The function is available only when
the filing unit is installed and owner
information is inputted.
Print All: Checked (All pages will prints)
Not checked (Cover page will prints
with DD code)
When the security print (4) is selected, inputs
owner information.
2
Off
On: When using as network printer and
owner information is inputted, cover
sheet with DD code and document file
name is printed.
3
*
When printing, selected image
together with document being printed.
between each page.
*
is combined
Example: 4 in 1
(Landscape) (Portrait)
1
3
22
Default setting
1 in 1
Letter/A4
None
No File
Off
None
2
1 2
4
3 4