Contents Of Limitation - Panasonic FP-D350 Manual

Contents of Limitation

(1) Limitation of print function
# Applicable printer emulations are PCL5e and PostScript (Level 2).
$ When using the parallel port and Ethrnet at the same time, select Job Completion
detection (PCL) in the parallel menu and select "Yes" for Digital Copier.
% Complicated originals such as graphics may not print, entirely.
In this case, change the resolurtion to 300 dpi or install 16 MB expansion memory.
C Standard memory is 8 MB. It is possible to print most Ledger/A3 size originals with
600 dpi.
(Example: When using 16 MB expansion memory)
1) It will print very complicated graphics.
2) As font cash area is increased, printing may become faster.
(Built in memory information can be obtained from the "Test Print" the test print menu
is in the user preset mode.)
(2) Paper size limitations:
# Paper size and paper tray
Unsupported paper size is selected, it must be used through the bypass tray.
Face down printing of unsupported paper size is not allowed.
$ Paper rotation is only available when automatic paper selection is selected.
% Precautions for filing and/or making security print.
Paper size can only be selected by the original key in the control panel of the
digital copier.
(3) Limitations for each OS
# Windows
C MSExcel may divide the print job when selecting [Entire Book]. The staple, punch,
duplex, DD filing, N in 1 and Booklet may not print properly.
C Please select [Time out setting] of parallel port as [0] if print job stops in the middle of
run or the image cuts off with parallel connection.
C Lotus AmiPro can only use with Windows 3.x.
C The PPD file is necessary when printing from PageMaker.
Please use General PPD file that comes with PageMaker, however the unique
function will not be available.
C Please [Login] with authorized user name such as [PowerUsers] or [Administrators]
when [DD filing], [Security Print] or [Image Overlay registration] setting required.
C When duplexing, please select sort mode. If duplex is selected with stack mode, it will
be available with less than 50 sets. (See P .21, 28)
CPCL5e is the printer language for Hewlett Packard corporation.
NOTE
39