Download Print this page

Project Nursery PNMAL2 User Manual page 25

Smart wi-fi baby monitor
Hide thumbs Also See for PNMAL2:

Advertisement

IMPORTANT INFORMATION
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
WARNING:
Strangulation
Hazard: Children
have STRANGLED in
cords. Keep this cord
out of the reach of
children (more than
3ft (1m) away). Never
use extension cords with
AC Adapters. Only use the
AC Adapters provided.
Baby Unit SET UP & USE:
• Determine a location for the Baby Unit that will provide the
best view of your baby in his/her crib.
• Place the Baby Unit on a flat surface, such as a dresser,
bureau, or shelf or mount the Unit to a wall securely using
the keyhole slots under the stand.
• NEVER place the Baby Unit or cords within the crib.
• Do not place the Baby Unit or cords in the crib or within
reach of the baby (the unit and cords should be more than
3 feet away).
For PLUGGABLE EQUIPMENT, the socket-outlet shall be
installed near the equipment and shall be easily accessible.
The power unit for this device should be plugged in so that it
stays vertical or lies flat.
WARNING
This digital video Baby Monitor is compliant with all relevant
standards regarding electromagnetic fields and is, when
handled as described in the User's Guide, safe to use.
Therefore, always read the instructions in this User's Guide
carefully before using the device.
• Adult assembly is required. Keep small parts away from
children when assembling.
• This product is not a toy. Do not allow children to play
with it.
• This Baby Monitor is not a substitute for responsible adult
supervision.
• Keep this User's Guide for future reference.
• Do not place the Baby Unit or cords in the crib or within
reach of the baby (the unit and cords should be more than
3 feet away)
• Keep the cords out of reach of children.
• Do not cover the Baby Monitor with a towel or blanket.
• Never use extension cords with power adapters. Only use
the power adapters provided.
• Test this monitor and all its functions so that you are
familiar with it prior to actual use.
Caution:
To reduce the risk of electric shock, do not remove cover (or back).
No user serviceable parts inside. Refer servicing to qualified service personnel.
for Project Nursery PNMAL2
• Do not use the Baby Monitor near water.
• Do not install the Baby Monitor near a heat source.
• Only use the chargers and power adapters provided.
Do not use other chargers or power adapters as this may
damage the device.
• Do not touch the plug contacts with sharp or metal
objects.
CAUTION
The camera should be installed and operated with a minimum
distance of 20cm between the radiator and your body.
The USB Port is for charging only.
Ecology
At the end of the product lifecycle, you should not dispose
of this product with normal household waste. Take this
product to a collection point for the recycling of electrical
and electronic equipment. Some of the product materials
can be reused if you take them to a recycling point. By
reusing some parts or raw materials from used products
you make an important contribution to the protection of
the environment. Please contact your local authorities in
case you need more information on the collection points in
your area.
Cleaning
Clean the Baby Monitor with a slightly damp cloth or with an
anti-static cloth. Never use cleaning agents or abrasive solvents.
Cleaning and care
• Do not clean any part of the product with thinners
or other solvents and chemicals –- this may cause
permanent damage to the product which is not covered
by the warranty.
• Keep the Baby Monitor away from hot, humid areas or
strong sunlight, and don't let it get wet.
• Every effort has been made to ensure high standards of
reliability for your Baby Monitor. However, if something
does go wrong, please do not try to repair it yourself –-
contact Customer Service for assistance.

Advertisement

loading