Miele PM 1210 Quick Manual page 2

PM 1210, 1214, 1217

Please read the instructions before installing and using this
machine and observe all warning and safety instructions.
 Preparing for use
 Switch the flatwork ironer on by pressing the
On / Off  button.
The "Finger guard" symbol will fl ash in the display.
 Now activate the finger guard by lifting it.
 Selecting the ironer speed
 Select the roller speed you want.
Symbol Speed range
Low speed range
fi
Medium speed range
fi fi
High speed range
fi fi fi
AU
 Ironing
The "Start" button begins to fl ash as soon as
the fl atwork ironer has reached the minimum
temperature.
 Now press the flashing "Start" button to start up
the flatwork ironer.
 Laundry feed
 Lay the item parallel to the roller at the start of
the laundry infeed table.
 Smooth the item.
 Feed the item into the machine.
Ironing with a coin-operated payment system
 Switch the flatwork ironer on by pressing the
"On / Off"  button.
The  symbol will fl ash in the display.
 Insert the coin or token.
The  symbol will go out in the display.
 Select the temperature range according to the
type of laundry.
 Select the roller speed you want.
 Selecting a temperature
 Select the temperature according to the type
of fabric.
Fabric Symbol Temperature
100 - 110 °C
Nylon / Artificial silk 
111 - 150 °C
Silk / Woolens
 
Cottons / Linens 151 - 185 °C
  
 FlexControl foot switch
 During ironing, press down the "FlexControl"
foot switch to change to Steam mode.
Continuing ironing
 Remove your foot from the foot switch to conti-
nue ironing.
When the  symbol goes out in the display,
the flatwork ironer is ready to operate and the
ironing time purchased will begin to count down.
 Press the Start button to start the fl atwork ironer.
At the end of the ironing time, the heater plate
disengages, heating will switch off and the roller
comes to a standstill. The  symbol fl ashes in
the display. More ironing time can be purchased
at any time.
en - AU
M.-Nr. 101 09 940 /01