Table of Contents
Advertisement
•
Do not use mirrors or other magnifiers to concentrate sunlight onto the modules. Artificially concentrated
light shall not be directed on the modules.
•
When installing the system, abide to all local, regional and national statutory regulations. Obtain a building
permit if necessary.
•
Under standard test conditions, the electrical characteristics are within ±10 percent of the indicated values
of Isc and Voc (irradiance of 1000W/cm², AM 1.5 spectrum, cell temperature 25°C).
•
Only use equipment, connectors, wiring and support frames suitable for solar electric systems.
Handling Safety
•
Do not lift the module by grasping the module's junction box or electrical leads.
•
Do not stand or step on the module.
•
Do not drop the module or allow objects to fall on the module.
•
To avoid glass breakage, do not place any heavy objects on the module.
•
Be cautious when setting the module down on to a surface.
•
Inappropriate transport and installation may break the module.
•
Do not attempt to disassemble the modules, and do not remove any attached nameplates or components
from the modules.
•
Do not apply paint or adhesive to the module top surface.
•
To avoid damage to the backsheet, do not scratch or hit the backsheet.
•
Do not drill holes in the frame. This may compromise the frame strength and cause corrosion of the frame.
•
Do not scratch the anodized coating of the frame (except for grounding connection). It may cause corrosion
of the frame or compromise the frame strength.
•
Be careful when setting the panel down onto a surface, particularly when placing it on a corner.
•
A panel with broken glass or torn backsheet cannot be repaired and must not be used since contact with
any panel surface or the frame can cause an electric shock.
•
Work only under dry conditions, and use only dry tools. Do not handle panels when they are wet unless
wearing appropriate protective equipment.
•
When storing uninstalled panels outdoors for any period of time, always cover the panels and ensure that
the glass faces upwards to stop water from collecting inside the panel and causing damage to exposed
connectors.
Installation Instructions IEC / Rev. 05-2018 V.5
RECOM © Copyright 2018
IEC INSTALLATION GUIDE
p. 4 of 14
www.recom-solar.com
Hide quick links:
Advertisement
Table of Contents
