Recom RCM-6MB Series Installation And Safety Instructions page 9

2,400 Pa Load (50lb/ft
Clamping range:
module edge to
1/4 Length ± 50mm
Use 4 clamps
Clamping range
from module edge
to 1/4 Width ± 50 mm
Use 4 clamps on short side
Insertion System
Insertion System
Use insertion system
on short side
Installation Instructions IEC / Rev. 05-2018 V.5
RECOM © Copyright 2018
2) 3,800 Pa Load (80lb/ft
Use 4 mounting holes
Clamping range
positions:
5/9 Length ± 50mm
Use 4 clamps
2) 5,400 Pa Load (113lb/ft
Use 8 mounting holes
A
Clamping range
(300 mm)
A
A = 0.065XLength
Clamping range
(100 mm)
Clamping range
Long Side Center ± 150 mm
Clamping range
from module edge
to 1/4 Width ± 50 mm
Clamping range
Long Side Center ± 150 mm
Use 4 clamps on short side and 2 clamps
at the center of each long side of the frame
Insertion System
Clamping range
(100 mm)
Insertion System
Use insertion system on short side
and 2 clamps at the center
of each long side
IEC INSTALLATION GUIDE
2)
A
A
Insertion System
Insertion System
Use insertion system
on long sides
p. 9 of 14
www.recom-solar.com