Parameters Setting; Mode Setting; Output Voltage Class Setting - Thiele Mission 6K Series Manual

4.3

Parameters setting

The setting function is controlled by 3 buttons (Enter , Off
value adjustment; Off
After the UPS turn ON, press buttons &
finishing setting the parameter, press "ON" until exiting out of the current interface.
Note: Figure at left corner is the page number of the setting pages. After entering the setting interface, it will exit
when without operation in 30s.

4.3.1 Mode setting

After entering the setting menu, it's mode setting defaulted, and the mode setting line flashing as in above
picture.
•
Use button Enter
•
Press or
parallel redundancy quantity setting.

4.3.2 Output voltage class setting

Output voltage setting (Note: Inside the broken-line is the flashing part.)
When under the mode setting press On
voltage setting. The output voltage line flashes as in above picture.
•
Use button Enter
240.
•
Press or
setting or frequency setting.
NOTE: When powered by inverter, it is necessary to turn off the inverter before setting voltage and frequency
level.
Rev. 02 –13 October 2015
klick to
klick to
www www
u-s-v
Y O U R C O N N E C T I O N TO S A F E T Y
ACDC-DCDC
& On ---for choosing different pages.
for 3 seconds and then goes into the setting interface page. After
Mode setting (Note: Inside the broken-line is the flashing part.)
to choose different mode. There are 3 different modes for setting: ECO, PAL, NOR.
to exit the mode setting (save the mode setting), and goes to output voltage setting or
or when under frequency setting press Off , it goes to the output
to choose the different output voltage. There are 3 different voltages---220, 230,
to exit the output voltage setting (save the output voltage setting) and goes to mode
klick to
www
Y O U R C O N N E C T I O N TO S A F E T Y
SYSTEME
, On ): Enter
Input
Input
klick to
www
Y O U R C O N N E C T I O N TO S A F E T Y Y O U R C O N N E C T I O N TO S A F E T Y
CONTACT
YOUR CONNECTION TO SAFETY
---goes into the setting page and
klick to
www
Y O U R C O N N E C T I O N TO S A F E T Y
CALLBACK
16