Huawei OceanStor 2600 V3 Product Description page 108

OceanStor 2600 V3
Product Description
No.
11
12
13
Rear View of the Quorum Server
Figure 4-78
Issue 09 (2019-05-15)
Indicator and
Button
NMI button
Power button/indicator Yellow and green
UID button/indicator
shows the rear view of the quorum server.
Copyright © Huawei Technologies Co., Ltd.
Color State
None The NMI button triggers a quorum
server to generate a non-maskable
interrupt. You can press this button or
control it remotely through the
WebUI.
NOTE
l Click the NMI button only when the
l Click the NMI button only for internal
l Off: The quorum server is not
l Blinking yellow: The system is
l Steady yellow: The system is in
l Steady green: The system is
NOTE
You can hold down the power button for 6
seconds to power off the quorum server.
Blue The UID button/indicator helps
identify and locate a quorum server in
a rack. You can turn on or off the UID
indicator by manually pressing the
UID button or remotely running a
command on the iBMC CLI.
l Steady on: The quorum server is
l Off: The quorum server is not
l You can hold down the UID button
4 Hardware Architecture
OS is abnormal. Do not click this
button when the quorum server is
operating properly.
commissioning. Before clicking this
button, ensure that the OS has the
handler for NMI interrupt. Otherwise,
the OS may crash. Exercise caution
when clicking this button.
powered on.
being started.
the standby state.
properly powered on.
located.
located.
for 4 to 6 seconds to reset the
system.
100