Advertisement
®
®ÂØÒňÎ
6
While watching the display, play the pads along with the metronome. If your timing
is accurate, the dots appear evenly, either on or within the grid lines.
Tip:
Press F3 to see a more detailed view. Press F2 to expand the view.
When you're finished, press SCOPE again.
7
Note:
For additional details about the Scope feature, including changing the time
signature, refer to Page 43 in the TD-9 Owner's Manual.
Starting Over
If you'd like to redo the TD-9's settings from scratch, you can use the following procedure
to clear the TD-9's internal memory and reload its factory settings.
Caution:
When you perform the following steps, all of your settings are lost. Be sure to back
up any information you wish to keep before reloading the TD-9's factory settings.
1
Press SETUP so it's lit.
2
Press F3 (UTIL).
Press F3 (RESET).
3
4
Press F3 (EXEC).
5
Press F3 (OK).
©2008 Roland Corporation U.S.
TD-9
Percussion Sound Module
www.RolandUS.com
TBS261
2
Advertisement
