Navico Simrad RS100 User Manual page 20

20 |
AIS FUNCTION
SILENT MODE
AIS DISPLAY
AIS setup
CPA
TCPA
CONFIG VESSEL
GPS ALERT
WX ALERT
Alarms
DSC ALARM
CPA ALARM
WIRELESS HANDSET
Handsets
CONFIGURE HANDSET
GPS STATUS
SYSTEM DIAGNOSTICS
Diagnostics NMEA2000 STATUS
AIS DIAGNOSTICS
HANDSET STATUS
SELECT REGION/COUNTRY
Reset
SYSTEM RESET
Key:
( ) - a checkbox in the menu option.
¼ Note:
If the menu option is selected, the checkbox has an X in it; if not selected, the checkbox will be
just an empty square. See example images in the "Edit my channels" on page 21.
( > ) - means further submenu options available.
Scan
This menu is used to access the Scan menu.
¼ Note: Scan menu can also be accessed by short pressing the SCAN key.
In the Scan menu, you can choose to scan all channels or selected channels available in the MY
CHANNELS list.
¼ Note:
Scanning is not available if ATIS mode is turned on.
All scan
Scans all channels cyclically for activity. When a signal is received, scanning stops at that channel and the
BUSY icon appears on the screen. If the signal ceases for more than 5 seconds, the scan automatically
resumes.
•
Press or to temporarily skip over (lock out) a busy channel and resume the scan. The direction
selected determines if the scan goes up or down the channel numbers (ie 'forward' or 'reverse'). If it
is still busy when the scan completes a full cycle, it will stop again at this channel. Note that it is not
possible to skip over the priority channel.
• When stopped on a busy channel, press OK to permanently skip over the channel. The SKIP icon will
show on the LCD for this channel.
•
To cancel a skipped channel, select the channel while in normal mode (non-scan mode) then press the
OK key - the SKIP icon will disappear. Repowering the radio also restores all skipped channels.
•
Press SCAN or X while scanning is active to stop at the current channel and return to normal operation.
All channels + 16
Scans all channels cyclically, but checks the priority channel after every channel step.
My channels
Scans all channels selected in EDIT MY CHANNELS.
Radio menus | RS100 / RS100-B / V100 / V100-B User Manual
(ON/OFF)
(MMSI/NAME)
(>)
(>)
(>)
(>)
(>)
(>)
(>)
(>)
(>)
(>)
(>)
(>)
(>)
(>)
SELECT REGION
(YES/CANCEL)
NRS-2 only
NRS-2 only
NRS-2 only
NRS-2 only
NRS-2 only
NRS-2 only
US/CAN country
modes