Navico Simrad RS100 User Manual page 13

D Current menu item selected is highlighted.
E
Arrow indicates additional sub-menu items for the menu option.
¼ Note: Press the X/POWER key to step backwards to the previous menu page, or exit the menus
completely. Press the OK/HL key to make selections in the menu.
Entry of alphanumeric data
Press the and keys to scroll through the alphanumeric characters, or use the keypad on the wired
handset to enter text (i.e, press the 5 key 2 times to enter the letter K).
Press the OK/HL key, to select and step to the next character.
Press the DSC/MENU key to step backwards.
Press the X/POWER key to cancel entry and return to previous menu.
LCD symbols and meanings
When the system starts up, a splash screen momentarily displays the brand, model, country mode,
software version, and MMSI.
During normal operation, the following icons may be displayed on the screen depending on setup:
Symbols Descriptions
Radio is transmitting
Receiver busy with incoming signal
Low Transmit power selected (1W)
High Transmit power selected (25W)
Current channel is Duplex (Simplex when OFF)
Current channel is receive only
Local mode enabled (used when in areas of high radio traffic, i.e. inner harbor)
Channel is saved as a favorite
Channel will be skipped during a scan
Weather channel stored by user (EU & INT country modes only)
Channel bank is set to USA
Channel bank is set to International. (Channels available depends on selected country
mode)
Channel bank is set to Canada
ATIS functionality is enabled (EU country mode only - must be enabled when in European
inland waterways)
DSC functionality is enabled
DSC functionality is enabled, auto switch is turned OFF
AIS function is enabled - Receive only mode (NRS-2 only)
AIS Class-B function is enabled – Transmit and Receive mode (NRS-2 only)
AIS Class-B Silent Switch mode is active – AIS transmissions are disabled (NRS-2 only)
Internal GPS is enabled, with valid 3D fix
Internal GPS is enabled, no fix
External GPS is enabled, with valid 3D fix
External GPS is enabled, no fix
Weather alert enabled (USA/CAN only)
General information | RS100 / RS100-B / V100 / V100-B User Manual
| 13