Navico Simrad RS100 User Manual page 18

18 |
Wired Handset Numeric Keys
Depending on the mode the radio is in, the numeric keys on wired handsets provide additional
functionality.
• NORMAL mode - System is in standby:
Short press enters the numeric digit (i.e. channel number).
Long Press opens a pre-determined function or menu.
• DATA INPUT mode - Entering data in a menu:
Short press enters the numeric digit. Subsequent presses enters a letter. The displayed letter is accepted
after a short pause, or on pressing a different key.
• INTERCOM mode - System is in Intercom mode:
Short press makes a direct call to another intercom station.
Key Mode
Normal
0 Data input
Intercom
Normal
1 Data input
Intercom
Normal
2 Data input
Intercom
Normal
3 Data input
Intercom
Normal
4 Data input
Intercom
Normal
5 Data input
Intercom
Normal
6 Data input
Intercom
Normal
7 Data input
Intercom
Normal
8 Data input
Intercom
Normal
9 Data input
Intercom
General information | RS100 / RS100-B / V100 / V100-B User Manual
Short press
0
0
Call all IC stations
1
1
Direct call to Handset-1
2
2, A, B, C
Direct call to Handset-2
3
3, D, E, F
Direct call to Handset-3
4
4, G, H, I
Direct call to Handset-4
5
5, J, K, L
Direct call to Handset-5
6
6, M, N, O
Direct call to Handset-6
7
7, P, Q, R, S
Direct call to Handset-7
8
8, T, U, V
Direct call to Handset-8
9
9, W, X, Y, Z
n/a
Long press
Hailer mode menu
(blank character/space)
All PA announce tone
Horn mode menu
n/a
n/a
Alarms config. menu
n/a
n/a
Speaker setup ON/OFF
n/a
n/a
Diagnostics - Handsets
n/a
n/a
Position display
n/a
n/a
Navigation mode
n/a
n/a
Speakers config. menu
n/a
n/a
AIS Silent mode menu
n/a
n/a
My channels
n/a
n/a