Inspection Before Use; Inspection Of Appropriate Connection; Inspection Of Material Surface - Hitachi EUP-L75 Instruction Manual

2. Inspection before Use

Prior to use, the probe must be carefully inspected that it is
appropriate for use.
2.1

Inspection of appropriate connection

2.1.1 Confirm that the system is correctly operating. Refer to the
instruction manual for the ultrasound diagnostic scanner.
2.1.2 Do not attach or connect unauthorized devices nor instruments
on the probe, such as unauthorized biopsy attachments.
2.2

Inspection of material surface

2.2.1 Visually check the surface of the probe head, housing and cable
for any crack, scratch or denaturalization. If you find any
damage, do not use the probe and contact a service support
immediately.
2.2.2 Visually inspect the magnetic sensor attachment and the spacer
for RV2S for any crack, deformation, or denaturalization. If
you find any damage, do not use them and contact a service
support immediately.
2.2.3 Visually inspect the elasto coupler for any crack, deformation,
or denaturalization. If you find any damage, do not use the
elasto coupler and contact a service support immediately.
- 5 - Q1E-EP1199