Download Print this page

Maintenance And Safety Inspection - Hitachi EUP-L75 Instruction Manual

Linear array probe
Hide thumbs

Advertisement

6. Maintenance and Safety Inspection

1) Visually inspect the surface of the probe head, housing, cable
and connector for any crack, scratch or denaturalization. If you
find any damage, do not use the probe and contact a service support
immediately.
2) Visually inspect the surface of the magnetic sensor attachment
and the spacer for RV2S for any crack, deformation or
denaturalization. If you find any damage, do not use them and
contact a service support immediately.
3) Visually inspect the surface of the elasto coupler for any crack,
deformation or denaturalization. If you find any damage, do not
use it and contact a service support immediately.
4) After using the probe, the magnetic sensor attachment, the spacer
for RV2S and the elasto coupler, it should be cleaned and disinfected
and sterilized according to " 5.Reprocessing Procedure", then store it
in a cool and dark place and avoid high temperature, humidity and
direct sunlight.
- 27 -
Q1E-EP1199

Advertisement

loading

This manual is also suitable for:

Eup-l54ma