Evaporator And Defrost System - Midea TMF Series Service Manual

Service Manual_2018-V2.0
2） Remove 3 screws using a cross screwdriver to get
the fan and components of fan brackets;
3） Remove 1 screws using a cross screwdriver to
separate fan brackets and the fan;
4） Separate the fan and fan blade (pull it out using
great force);
5） Replace the fan in reverse steps;

8.6 Evaporator and Defrost system

Evaporator in freezing chamber
Evaporator in freezing chamber
1） Remove the air duct components in freezing
chamber.
2） Disconnect all connectors.
3） Remove the welding on inlet and outlet tubes.
4） Remove two screws which are used to fix the
evaporator and remove the evaporator.
Components on the evaporator
Defrost thermostat None
24