Service Manual_2018-V2.0
2)Pull all connector terminals out of the refrigerating
air duct to remove its components;
3)Uncover the temperature control indication sticker
on the cover plate of the air duct;
4)Gently pry out the PCB installation box with a
straight screwdriver to get the master control board
and installation box components;
5)Pry open the buckle of the PCB installation box with
a straight screwdriver to see the PCB board;
6)Remove 2 screws using a cross screwdriver to
remove the master control board. Pull out the
connector terminal and replace the master control
board in reverse steps;
8.10Water dispenser(None)
8.11Ice maker (None)
8.12water filter component (None)
30