Summary of Contents for Carlson Pro Pets Saloon Dog Door
Page 1
3/32” Drill Bit Caution It is recommended that you hire a professional installer; however Carlson Pro Pets Pet Doors can be installed by a homeowner with Do It Yourself Abilities. Be sure to check for electrical wires, gas lines, and load bearing studs before cutting into your wall.
Page 2
3. Using a stud finder, locate the wall studs and mark the edge. For ease of installation it is simpler to work from the left side stud. This will make notching for the door lock easier as explained later. 4. Measure the height of your pet at the shoulders, add 5” to this measurement and mark this height on the wall.
Page 3
1-2 weeks, depending on use, to fully break in and seat against the frame. Thank You for purchasing a Carlson Pro Pets, Pet Door The Finest Pet Door Available Contact Carlson Pro Pets directly at the following: Carlson Pro Pets Toll Free: 1-800-234-1069 E-Mail:...
Page 4
Training Tool Instructions We have included a training tool to assist you while training your dog or cat to use your new Carlson Pro Pets pet door. Here’s how it works: 1. From either the inside or outside push the flap of your new pet door away from you.
Need help?
Do you have a question about the Pro Pets Saloon Dog Door and is the answer not in the manual?
Questions and answers