Download Print this page

Burn Hazard - Eastwood 51460 Instruction Manual

Buffing & metal finishing
Hide thumbs Also See for 51460:

Advertisement

To order parts and supplies: 800.343.9353 >> eastwood.com
• Do not apply excessive force to Buff Motor while in use. Always make sure
the workpiece or material being cut is held securely and work is done only in
the lower front "Work Zone" quadrant of the Buff Wheel (FIG 2).
• Operating Buff Motors can quickly and violently propel a workpiece at over
80 MPH while operating causing injury and or property damage. Always
wear a face shield and ANSI approved eye protection when buffing to protect
face and eyes.
• A rotating Buff Wheel can quickly catch loose clothing, long hair, or jewelry
causing serious personal injury. Keep all loose clothing, long hair, and
jewelry away from operating Buff Motor.
• Rotating Buff Wheels can cause burns and abrasions if contacted by bare
flesh. Do not touch rotating Buff Wheels. Always wear thick, well-fitting
leather gloves and arm protection when buffing.
• A damaged Buff Wheel can disintegrate at high speed causing personal
injury or property damage. If excessive vibration is felt, discontinue use
immediately and disconnect tool from electrical supply. Inspect Buff Wheel
or Motor for damage. Do not resume use until resolution is found.
• Buff Motors can quickly start up when handling while plugged in to electrical
supply causing serious personal injury. Always unplug Buff Motor from the
electrical supply before changing Buff Wheels or performing maintenance.
• This Buff Motor is designed for use only with Fabric Buff Wheels and does
not have the shaft support or necessary guards to protect the operator form
solid debris or shattering grinding wheels.
• Applying excessive pressure against a wheel while buffing can rapidly build
heat in an object and cause burns and damage to the object. Do Not apply
excessive pressure while buffing.
• This Buff Motor will eject a trail of grit, fibers and debris at high speed
which can injure others nearby. Keep all persons and pets away from
the work area.
INJURY HAZARD!
INJURY HAZARD – DO NOT USE
GRINDING WHEELS ON THIS BUFF MOTOR!

BURN HAZARD!

3

Advertisement

loading

This manual is also suitable for:

13542