•
If the rear corner radars have
been replaced or repaired, we
recommend that the vehicle
be inspected by an authorized
HYUNDAI dealer.
•
If there is impact on the rear
corner radar or near the radar,
even though the warning mes-
sage does not appear on the
cluster, Blind-Spot Safety sys-
tem may not operate properly.
We recommend that the sys-
tem be inspected by an
authorized HYUNDAI dealer.
•
Use only genuine parts to
repair the rear bumper where
the rear corner radar is locat-
ed.
•
Do not apply license plate
frame or objects, such as a
bumper sticker, film or a
bumper guard near the rear
corner radar.
•
The system may not work
properly if the bumper has
been replaced, or the sur-
roundings of the rear corner
radar has been damaged or
paint has been applied.
•
If a trailer, carrier, etc. is
installed, it may adversely
affect the performance of the
rear corner radar or the func-
tion may not operate.
CAUTION
For more details on the precau-
tions of the front view camera,
refer to "Forward Collision-
Avoidance Assist (FCA)" sec-
tion in this chapter.
System settings
Setting functions for the system
Blind-Spot Safety
With the Engine Start/Stop button in
the ON position, select or deselect
'Driver Assistance → Blind-Spot
Safety' from the Settings menu to set
whether or not to use each function.
If 'Warning Only' is selected, the sys-
tem will warn the driver with a warn-
ing message and an audible warning
depending on the collision risk levels.
Braking will not be assisted.
If 'Off' is selected, the system will
turn off.
5
OTM070202N
5-85