Connecting The Trekstor Moviestation To The Computer - TrekStor MovieStation pocket c.uc Manual

2) Connecting the TrekStor MovieStation to the computer

Caution: To prevent damage to your MovieStation, you must make sure you always observe the following order when
a
connecting the MovieStation to your computer.
a) First connect the power supply included in delivery to the "dC iN" port of the MovieStation. Then plug the power
supply into a socket.
b) After the power has been connected, connect the USB port of the MovieStation to a USB port on your computer.
Only use the provided USB connection cable to connect the device to a USB port on your computer.
i
c) Turn on the MovieStation by briefly pressing the on/off switch
the MovieStation and adds the MovieStation as a "l
Windows) or "d
esKTOP
d) If you want to turn off the MovieStation, briefly press the on/off switch
" (Mac® OS X and Linux®).
. Your operating system automatically recognizes
/
" (or "l ") to "M
OCAl disK OCAl dRiVe
.
/
C "/"C " (Microsoft®
Y OMPuTeR OMPuTeR
EN
29