Intel Shooting Star Mini Quick Start Manual page 4

Introduction
This document will help the operator understand the technical requirements and operational
procedures essential to performing a basic flight with the Intel® Shooting Star Mini™ system. It will
describe the hardware and software interfaces of the system and assist in getting the system
operational.
Goals
After reading this quick start guide and getting familiarized with the system, the operator will be able
to power on the system, have access to the Intel® Shooting Star Mini™ Drones and perform a simple
test flight.
This document:
1. Describes the setup of the Intel® Shooting Star Mini™ Launchpads.
2. Provides guidance on how to set up and use the Indoor Location Technology system.
3. Demonstrates the basic features of the Intel® Shooting Star Mini™ Control Center software.
4. Walks through a test flight of the Intel® Shooting Star Mini™ Drone.
This document does not:
1. Cover each feature in detail.
2. Provide in-depth training.
Terminology
CC: The Intel® Shooting Star Mini™ Control Center is the software required to operate the system.
Drone: The Intel® Shooting Star Mini™ Drone is the aerial unit of the system.
Launchpad: Intel® Shooting Star Mini™ Launchpad is the ground unit of the system, used to charge
the Drones.
ILT: The Indoor Location Technology system defines the 3-D coordinates of each drone, enabling
indoor and outdoor navigation as well as wireless data transfer.
NM: Intel® ILT Network Manager
© Intel
4