Intel Shooting Star Mini Quick Start Manual page 9

5. In order to ensure that the network is calibrated properly, we suggest that you perform a
static and a dynamic test using the anchor and tag tracking tool in the GUI. A static test can
be used to check the network quality over time. You will turn on the tracking tool and allow
the system to track the anchor locations for at least 15 minutes.
6. After the network has converged to produce a stable static test, you may proceed to the
dynamic test. The tracking tool allows the user to highlight a particular anchor or tag in a
different color; you can use this feature to perform a dynamic test of the network. Power on a
tag. The system will automatically detect the tag and show it in the GUI. Next, turn on the
tracking feature and select the tag that is powered on. The GUI will automatically highlight this
tag in a different color. Now carry the tag around the room. You should see a highlighted path
on the screen that corresponds with your trajectory.
7. After your system has successfully passed the static and dynamic tests, you are ready to
begin using your network.
8. Set IP address of wired Ethernet connection via Control Panel/Network and
Internet/Network Connections and disable Firewalls.
© Intel
9