Intel Shooting Star Mini Quick Start Manual page 16

o Cable routes shall be guarded by use of railings, industrial safety gates, floor hole
covers or toe-boards
o Minimal passing between items shall take place once initial setup is complete.
Launch pads can be directly next to each other.
 Continuous monitoring and event reporting shall be implemented and conducted
 A Battery Maintenance Plan shall be implemented and adhered to
 Replace all mechanical parts that have been damaged or have been subject to known
over load
 Safety Audits shall be conducted
Operation
 Operational safety and safety of work training is mandatory
o Crew shall be trained to perform typical tasks and to operate safely
o Safety Briefing and safety training is mandatory
o If interacting with performers a choreography shall be developed and trained,
and rehearsals shall be conducted
 Regular inspection before commission according to checklist shall be conducted and
documented
 Geo fence to terminate flight within pre-defined safety area must be defined and
implemented.
 Limit operational altitude to 50m AGL; implement 1:1 rule to audience when flying more
than 50m AGL
 Operations shall be suspended when adequate level of safety cannot be maintained
 If required due to an inability to control environmental conditions, enforcement of
safety area with restricted access (here: crew only; no exposure to third party) shall be
conducted
 Avoid passing between items on the ground
© Intel
16