Table of Contents
Advertisement
Downloaded from
www.Manualslib.com
Introduction
Operating with the remote control
Point the remote control at the remote
sensor and press the buttons.
Distance:
About 5 m from the
front of the remote
sensor.
Angle:
About 30° in each
direction of the front of
the remote sensor.
Front Panel Display
1
2
9
1080ip
720p
10
480ip
1. PLAY indicator
Lights when playing.
2. PAUSE indicator
Lights when paused.
3. DVD indicator
Lights when a DVD disc is inserted.
4. CD indicator
Lights when a CD disc is inserted.
5. TRK (TRACK) indicator
Lights when a CD/MP3 disc is inserted.
6. Audio Channel indicator
Shows the audio channel of the current DVD/BD.
7. HDMI indicator
Lights when HDMI TV is connected.
8.
(REPEAT) indicator
Illuminates when REPEAT is pressed.
9.
/
SKIP indicator
Lights while in fast forward / fast reverse mode.
10
manuals search engine
* Do not expose the remote sensor of the Blu-ray disc player
to a strong light source such as direct sunlight or other
illumination. If you do so, you may not be able to operate
the Blu-ray disc player via the remote control.
Notes:
• Direct the remote control at the remote sensor of the Blu-ray
disc player.
• When using the remote control, press the buttons at intervals
of about 1 second to ensure the correct mode of operation.
• Do not drop or give the remote control a shock.
• Do not leave the remote control near an extremely hot or humid
place.
• Do not spill water or put anything wet on the remote control.
• Do not open the remote control.
• If the remote control is not going to be used for a long time,
remove the battery to avoid damage caused by battery leakage
corrosion.
3
4
5
6
DVD
TRK
2 c h
CD
MULTI
11
10. Resolution indicator
Shows resolution of video output.
11. Character indicators
Displays various kinds of information such as elapsed time
or message, etc. (See Example shown as below.)
7
8
HDMI
Indicates the
elapsed time
Closing the
disc tray
Indicates that a
Blu-ray disc is
inserted
Loading a disc
Advertisement
Table of Contents
