Display.setting; Color Space; Hdmi Deep Color - Toshiba BDX1100KU Owner's Manual

Display Setting
1. Press.SETUP
[General Setting] menu.is.displayed.
2. Press  to.select.[Display Setting],.
then.press...
3. Select.an.option,.press  to.access.
... Display Setting...
TV
Video Process
Motion Vide...
Move cursor key to select menu option
then use "OK" key to select
4. Press / to.select.a.setup.option.and
press ..
5. Select.the.setting.you.wish.to.change
and press OK to confirm.
-. Press  to. return. to. the. previous.
menu.
-.Press SETUP.to.exit.the.menu..
[TV]
• [TV Screen]
Select. the. screen. format. according. to.
how.you. want.the. picture. to. appear. on.
the.TV.
{16:9 Full}.–.for.a.disc.with.the.aspect.
ratio.of.4:3,.the.output.video.is.stretched.
into.16:9.full.screen.
{16:9 Normal}. –. for. a. disc. with. the.
aspect. ratio. of. 4:3,. the. output. video. is.
resized. vertically. to. match. what. will. be.
seen.on.the.display.
{4:3 Pan&Scan}. –. for. standard. TV,.
Display. a. wide. picture. on. the. entire.
screen. and. cuts. off. the. redundant.
portions.
{4:3 Letterbox}. –. for. standard. TV,.
Display. a. wide. picture. with. two. black.
borders. on. the. top. and. bottom. of. 4:3.
screen.
• [Resolution]
Select. a. video. output. resolution. that. is.
compatible. with. your. TV. display.
capability.
{Auto}. –. Select. the. most. suitable.
resolution.according.to.the.TV..
{480I/576I},.{480P/576P},.{720P},.
{1080I},.{1080P}.
–.Select.a.video.resolution.setting.that.is.
best.supported.by.the.TV. See.TV.manual.
for.details.
1
TV Screen 16:9 Normal
Resolution 480I/576I

Color Space

YCbCr422

HDMI Deep Color

Off
HDMI 1080P 24F On
SETUP Exit
Note:
-When resolution is set to 720p/1080i/1080p:
(1) If only CVBS connected, the resolution of CVBS
video output will be set to 480i/576i automaticlly.
(2) If HDMI and CVBS are both connected, there will
be no CVBS video output, instead, a message will be
shown as follows:
Out Of Range:Check Display Resolution
• [Color Space]
Select a predefined Color space of
picture.
{RGB}.–.select.RGB.Color.space.
{YCbCr}.–.select.YCbCr.Color.space.
{YCbCr422}. –. Select. YCbCr422. Color.
space.
{Full RGB}. –. select. Full. RGB. Color.
space.
• [HDMI Deep Color]
This. feature. is. available. only. when. the.
display. device. is. connected. by. a. HDMI.
cable,. and. when. it. supports. deep. Color.
feature.
{30 bits}.–.Output.30.bits.Color.
{36 bits}.–.Output.36.bits.Color.
{Off}.–.Output.standard.24.bit.Color.
Note:
-When the color space is "YCbCr422", even if HDMI
Deep Color is set to 30bits/36bits, it is not output with
Deep Color.
• [HDMI 1080p 24F]
{On}.–.Enable.1080p.24F.video.resolution.
setting.
{Off}. –. Disable. 1080p. 24F. video.
resolution.setting.
About HDMI 1080p 24F Notes:
If you want the 24Hz output, it should fulfill below 3
conditions:
1.TV supports the 24Hz display:
2.Player choose the 24Hz option in the setup menu;
3.Media must be the 24Hz video.
Notes:
- This resolution becomes effective only when the
playing BD-Disc contents are Film source:
- During HDMI 1080p 24F playback, there will be no
composite output.
[Video Process]
... Display Setting...
Video Adjust
TV
Video Process Sharpness
Motion Video...
Move cursor key to select menu option
then use "OK" key to select
More...
Low
SETUP Exit