Display Setting; Hdmi Deep Color; Video Process - Toshiba BDX1200KE Owner's Manual

Display Setting

1. Press SETUP, [General Setting] menu
is displayed.
2. Press to select [Display Setting],
then press .
3. Select an option, press
TV

Video Process

Motion Vide...
Move cursor key to select menu option
then use "OK " key to select
4. Press to select a setup option and
/
.
press
5. Select the setting you wish to change
- Press to return to the previous
menu.
- Press SETUP to exit the menu.
[TV]
• [TV Screen]
Select the screen format according to
how you want the picture to appear on
the TV.
{16:9 Full} – for a disc with the aspect
ratio of 4:3, the output video is
stretched into 16:9 full screen.
{16:9 Normal} – for a disc with the
aspect ratio of 4:3, the output video is
resized vertically to match what will be
seen on the display.
{4:3 Pan&Scan} – for standard TV,
Display a wide picture on the entire
screen and cuts off the redundant
portions.
{4:3 Letterbox} – for standard TV,
Display a wide picture with two black
borders on the top and bottom of 4:3
screen.
• [Resolution]
Select a video output resolution that is
compatible with your TV display
capability.
{Auto} – Select the most suitable
resolution according to the TV .
{ }, {
{1080i}, {1080p}
– Select a video resolution setting that
is best supported by the TV. See TV
manual for details.
Note:
18
to access.
Display Setting
TV Screen 16:9 Full
Resolution Auto
Color Space YCbCr422

HDMI Deep Color

Off
HDMI 1080/24p
On
SETUP Exit
}, {720p},
• [Color Space]
picture.
{RGB} – Select RGB Colour space.
{YCbCr} – Select YCbCr Colour space.
{YCbCr422} – Select YCbCr422 Colour
space.
{Full RGB} – Select Full RGB Colour
space.
• [HDMI Deep Color]
This feature is available only when the
display device is connected by a HDMI
cable, and when it supports deep Colour
feature.
{30 bits} – Output 30 bits Colour.
{36 bits} – Output 36 bits Colour.
{Off} – Output standard 24 bits Colour.
Note:
• [HDMI 1080/24p]
{On} – Enable 1080/24p video
resolution setting.
{Off} – Disable 1080/24p video
resolution setting.
Notes about HDMI 1080/24p:
3 conditions:
1.TV supports the 24Hz display;
2.Player choose the 24Hz option in the setup
menu;
3.Media must be the 24Hz video.
Notes:
source.
be no composite output.
[Video Process]
Display Setting
Video Adjust
TV
Video Process
Sharpness
Motion Video...
Move cursor key to select menu option
then use "OK " key to select
More...
Low
SETUP Exit