NEC E328 User Manual page 76

Video
Color Temperature
Cool
Normal
Warm
Native
Custom
Noise Reduction
Adaptive Contrast
Gamma
Native
2.2
2.4
Ambient Light Sensing
Color Enhance
HDR Mode
Backlight / Brightness
Contrast
Video Black Level
Sharpness
Color
Tint
Reset Video Settings
Adjusts the color temperature of the entire screen.
A low color temperature will result in a reddish screen. A high color temperature will make the
screen bluish.
If a temperature needs further adjustment, the individual R/G/B/ levels of the white point can
be adjusted.
High color temperature setting. The screen will be bluish.
Intermediate setting.
Low color temperature setting. The screen will be reddish.
Turns the color temperature adjustment off and displays the image with the panel
characteristics.
Customizable settings.
Reduces the image noise.
Adjusts automatically the contrast according to the image. If [High] is set, the image is shown
clearly but the brightness variation may appear not natural.
Adjusts the brightness of gray and other intermediate colors. (SDR)
Gamma correction is handled by the LCD panel.
Typical monitor gamma for use with a computer.
Typical gamma settings for use with video devices, such as DVDs and Blu-rays.
Adjusts automatically the brightness of the screen depending on ambient light within the room.
When set to [On], the brightness of the screen is adjusted automatically according to the room
brightness.
NOTEN When set to [ON], [Backlight / Brightness] cannot be changed.


Changes the colors of the image and the saturation to create a more colorful image.
When the monitor detects an HDR signal, you can select preferred gamma correction from
[Low], [Mid] and [High].
Adjusts the brightness of the image using the backlight.
Press the t and u the buttons to adjust the brightness. In general, use this function to adjust
the brightness.
NOTEN
When [On] is selected in [Ambient Light Sensing], this function cannot be


changed.
Adjusts the contrast.
Press the t and u the buttons to adjust the contrast.
Set the black level of the screen. When the setting is too low to show, the OSD characters are
changed to green.
Adjusts the sharpness of the image.
Press the u button to sharpen the image, or the t button to soften it.
NOTEN
The lines may appear as double lines depending on the setting. In such a case,


lower the sharpness setting.
Adjusts the color density of the screen.
Press the u button to increase the density, or the t button to decrease it.
Adjusts the tint of the image between R0-R50 and G0-G50.
Returns all settings in the Video menu to their default values.
English - 73