NEC E328 User Manual page 57

Network Settings
Click on "NETWORK" on the left-hand column on the HOME screen to enter the setting screen.
INPUT SOURCE: HDMI1
STATUS
PROTOCOL
TCP
AMX
NAME
NETWORK
SYSTEM
LOGOUT
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
DNS PRIMARY
DNS SECONDARY
AMX Settings
Click on "AMX" on the left-hand column on the HOME screen to enter the setting screen.
AMX BEACON When the monitor is connected to a network supporting the NetLinx control system by AMX, enables or
disables the function to send a beacon to the system from AMX Device Discovery.
NOTEN
When using a device that supports AMX Device Discovery, all AMX NetLinx control systems will recognize the


device and download the appropriate Device Discovery Module from an AMX server.
NETWORK SETTINGS
INTERFACE
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
DNS PRIMARY
DNS SECONDARY
Select a method for setting the IP ADDRESS.
Off: Sets fixed network settings.
On: Obtains the network settings from the DHCP server on the network.
Manual DNS: Obtains the network settings from the DHCP server on the network but the DNS
is set manually.
NOTEN
Consult your network administrator if you have any trouble with the connection.


Set the IP address for the monitor connected to the network when [Off] is selected for [DHCP].
Set the subnet mask for the network to which the monitor is connected when [Off] is selected for
[DHCP].
Set the default gateway for the network to which the monitor is connected when [Off] is selected for
[DHCP].
Enter [0.0.0.0] to delete the setting.
Enter the IP address of the primary DNS server of the network connected to the monitor.
NOTEN
Enter [0.0.0.0] to delete the setting.


Enter the IP address of the secondary DNS server of the network connected to the monitor.
NOTEN
Enter [0.0.0.0] to delete the setting.


Off
192.168.0.10
255.255.255.0
0.0.0.0
0.0.0.0
0.0.0.0
English - 54
Top