Creating A Power Schedule - NEC E328 User Manual

Creating a Power Schedule

The schedule function allows the monitor to automatically switch between power on and standby mode at different times.
To program the scheduleN
1. Enter the [SCHEDULE] menu in the OSD menu.
a. Use the p/q buttons of the remote control to select [Current
Time settings].
b Press the OK button of the remote control. Press the t, u
buttons of the remote control to move between the hours and
minutes fields.
c Use the p/q buttons of the remote control to set the time.
2. After setting the time, press the MENU button of the remote
control.
3. Use the p/q buttons of the remote control to select [Schedule
settings].
a. Press the OK button of the remote control. Place the cursor on [Power On] and press the OK button of the remote control
to enable the [Power On]. Press the t, u buttons of the remote control to move between the hours and minutes fields.
HDMI1
Use the p/q buttons of the remote control to set the time.
Schedule
Sleep Timer
Current Time settings
Schedule settings
HDMI1
b Use the t, u buttons of the remote control to place the cursor on [Power Off] and then press the OK button of the remote
Schedule
control to enable [Power Off]. Press the t, u buttons of the remote control to move between the hours and minutes
fields.
Sleep Timer
Use the p/q buttons of the remote control to set the time.
Current Time settings
Schedule settings
Adjust
4. After setting the schedule, press the MENU button of the remote control to return to the previous menu or press the EXIT
button to close the OSD menu.
Adjust
Power On disabled
Power On
12 00
Power Off
12 00
Power On
12 00
Power Off disabled
Power Off
Move Adjust
Return
MENU EXIT
12 00
Move Return Adjust
MENU EXIT
HDMI1
Schedule
Sleep Timer
Current Time settings
Schedule settings
Move
Power On enabled
Power On
Power Off
Power On
Power Off enabled
Power Off
Return
MENU
EXIT
EXIT Return
MENU
English - 44
Select
OK MENU
12 00
12 00
12 00
EXIT
EXIT
12 00
EXIT
EXIT
Power On
12 00
Power Off
12 00
Return EXIT
EXIT