Rane DC24 Schematics

QUICK START
The AC 22B can be either a Stereo 2-Way o
operated in the 2-Way Stereo mode. Labels bel
The AC 22B is a fully balanced output versi
instead of the standard ¼" TRS jacks. All other
model with an added switch. Where the AC 22
22B is configured by a SYSTEM MODE switc
To operate the AC 22B in Stereo 2-Way mo
labels above the controls and jacks.
When operated in the Mono 3-Way mode, t
below the controls and jacks. In Mono 3-Way m
only portion of the midrange filter. The Channe
front panel.
NEVER CONNECT ANYTHING EXCE
TO THE THING THAT LOOKS LIKE A TE
some special attention if you do not have an op
packed with your unit.
AC 22B CONNECTION
In agreement with IEC and AES/ANSI standar
wiring convention is pin 2 Positive, pin 3 Negative
pin 1 Signal ground (for unbalanced use), with the
case or shell tied to chassis ground.
BALANCED OPERATION
Use only when driving from a true balanced so
driving to a true balanced destination—either trans
coupled or active drive. Connect the input to pins 2
with pin 2 positive. Do not connect pin 1. Termina
OPERATOR