Update Ips Network Settings Dialog - Ross NK-IPS User Manual

Item
Throttle Switch
Requests
Remote IPS IP
Address
Remote IPS Port
Connections
Max. DashBoard
Connections
Number of
connected Clients
Log off Client #
Reset
Reset IPS
Other Functions
Refresh
Send Firmware
Send
Configuration
Reboot
Close

Update IPS Network Settings Dialog

Click the
Network Settings
dialog. Table 8.2 summarizes the fields displayed in the Update IPS Network Settings dialog.
NK-IPS User Guide (v5.0)
Table 8.1 NK Series IPS Interface
Parameters
Selected This is the primary NK-IPS when communicating with an
openGear MC1-MK.
Cleared This device is not the primary NK-IPS for an MC1-MK, or an
MC1-MK is not communicating with this device.
#.#.#.# For a primary NK-IPS, this field is set to 0.0.0.0. On a secondary
NK-IPS, enter the IP address of the primary NK-IPS.
# For a primary NK-IPS, this field can be left to the default port of
5000. On a secondary NK-IPS, enter the TCP Client port of the
primary NK-IPS.
# Specifies a limit to the number of DashBoard clients that the
NK-IPS will allow at any given time (up to a maximum of 5).
The default value is 3.
# Specifies how many clients are connected to the NK-IPS. The
maximum total is 20.
Selected The NK-IPS disconnects from the client device
Cleared The NK-IPS communicates with the client device
Selected Reboots the NK-IPS without clearing the NK-IPS settings. Any
changes to the NK Series IPS interface are sent to the device.
Cleared Does not reboot the NK-IPS
Reverts to the configuration previously sent to the device. The
NK Series IPS interface will display the last settings that were
sent to the NK-IPS via the Send Configuration function.
Opens a file browser to select a software/firmware file to send to
the device
Uploads the settings to the device. All configuration items
become active only after uploading.
Reboots the NK-IPS. This function does not clear the NK-IPS
settings.
The
RESET
function.
Closes the NK Series IPS interface in DashBoard
button on the NK Series IPS interface to display the Update IPS Network Settings
Description
button on the front panel will perform the same
DashBoard Interface Overview • 39