DashBoard Interface Overview
The DashBoard client software enables you to monitor and configure your NK-IPS. Using the interfaces provided
via the DashBoard client software, you can:
• Configure the network connection for your router
• Configure router levels and assign level names
• Assign physical router inputs and outputs to logical sources and destinations
• Configure source and destination labels
• Perform crosspoint preset/takes
• Monitor the status of multiple levels
• Create and use salvos
For More Information on...
• the DashBoard client software, refer to the DashBoard User Manual.
NK-IPS in DashBoard
NK-IPS groups the configuration, monitoring, and operating features in a Tree View in the DashBoard client
window. Each node of the tree opens to reveal one or more sub-nodes, giving access to the features for your router.
NK-IPS includes the following interfaces, as separate nodes, in the DashBoard Tree View.
NK Series IPS Interface
The NK-IPS uses the NK Series IPS interface in DashBoard to allow users to configure interface and security
options for the NK-IPS, as well as having the ability to assign a name and brief details for the device itself.
Any changes to the parameters on the NK Series IPS interface will need to be sent to the NK-IPS using the
button before the changes take effect.
Configuration
Table 8.1 summarizes the fields and menus displayed in the NK Switchboard interface.
NK-IPS User Guide (v5.0)
Figure 8.1 Example of an NK Series IPS Interface in DashBoard
DashBoard Interface Overview • 37
Send