General Information; Manufacturer And Country Of Origin; Copyright; Product Information - Packo AX Instruction Manual

General information

1.

1.1. Manufacturer and country of origin

1.2. Copyright

This manual has been prepared to ensure correct
and safe installation, use and maintenance of
the pump in accordance with the EC directives
"Machinery". It is originally written in Dutch,
English, French and German by the manufac-
turer. All other languages are translations of the
original manual.
PACKO INOX LTD has the copyright on this doc-
ument. This manual can be copied completely
for the manual of the machine or installation in
which the pump is used and can be used for the
instruction of the personnel who have to work

1.3. Product information

The FP, NP, ICP, MCP, MWP, MFP, PHP, FPP and
IPP series are single stage centrifugal pumps,
close coupled to the motor or onto a pedestal.
The inlet of the pump is located on the central
axial; the outlet is tangential or radial. These
pumps are used for circulating pure and slightly
contaminated liquids. The FP and MFP series
meet the hygiene requirements imposed by the
food industry and are suitable for circulating food
products. The PHP series have a high-grade
finish, which is agreed when the pump is ordered.
• Pumps with a suffix IL in their name are in-line
pumps and the direction of the liquid flow is
indicated with an arrow.
• The series IM are vertical cantilever pumps.
These are designed to be set vertically with
PACKO INOX LTD
Cardijnlaan 10 – Industriepark Heernisse
B-8600 Diksmuide
Belgium
Phone: + 32 51 51 92 80
Fax: + 32 51 51 92 99
E-mail: pumps@packo.com
with or on the pump. Any other publication, cop-
ying or use is prohibited.
This manual has been prepared carefully.
However it does not contain all the possible
accidents that could happen during installation,
operation and maintenance of the pump. It is
important that the pump is not used for any pur-
pose other than the specified application given
when ordering the pump and for those that the
pump was built. This might cause material dam-
age and injuries.
the pump immersed in the suction reservoir.
The motor has to stand above the maximum
liquid level.
• The MSP series are self-priming centrifugal
pumps.
• The VPC, VDK, MFF and IFF series are suit-
able for the circulation of liquids with a small
percentage of solid substances. The maximum
size of these substances is 1 cm for the MFF
and IFF types and half of the diameter of the
inlet for the VDK and VPCP types. These solid
substances can be damaged in pumping.
• The AX series are axial pumps suitable for
the circulation of big flows with a low head.
69