Introduction; General Information; Manufacturer; Copyright - Packo HP Series Instruction Manual

1 INTRODUCTION

1.1 GENERAL INFORMATION

Thank you for purchasing PACKO products!
This manual for the HP & LH series Rotary Lobe
Pumps describes safe and appropriate installation,
use, disassembly and assembly, maintenance and
troubleshooting of the pump.
Read and completely understand this manual to
learn how to service these pumps prior to
operating or servicing the product and observe to
pay special attention to the warnings.
This manual must always be available at the
installation location since no liability will be
assumed for any
malfunctions arising from non-compliance with
these operating instructions.

1.2 MANUFACTURER

JEC LTD
15-26, Beodeul-ro 1362, Paltan-myeon,
Hwaseong-si,
Gyeonggi-do, 18578, Rep. of Korea
Telephone: +82 31 355 0316
Telefax: + 82 31 355 0319
E-mail: export.kr@jec.verder.com

1.3 COPYRIGHT

These operating instructions are written to
support the installation,
maintenance of the pump in accordance with the
European machinery directive. They are originally
written in Dutch, English, French and German by
the manufacturer. All
translations of the original operating instructions.
PACKO INOX LTD has the copyright on this
document. These operating instructions may be
reproduced in full in the operating instructions of
the machine or installation in which the pump is
installed and may be used for training personnel
who must work on or with the pump. Any other
publication, reproduction in full or parts thereof is
prohibited.
damage or operational
the use and
other languages
Although these operating instructions have been
carefully drawn up, they do not however cover all
possible eventualities that can occur during the
installation, operation or the maintenance of the
pump. In any event, the pump must not be used
for purposes other than those stated when
ordering and for which the pump has been
constructed, as this could result in physical
damage and injuries.
the
are
3