Cableclear® Digital Noise Reduction - Toshiba 24V4210U User Manual

116
Using the TV's Advanced Features
Using the advanced picture settings
2 Highlight Picture Settings, and then press the OK button.
3 Highlight Advanced Picture Settings, and then press the OK
button.
4 Highlight Color Temperature, and then press the OK button.
In the Color Temperature field, press the ( /
5
buttons to select the mode you prefer (Cool, Medium, or
Warm).
Press the ( /
6
Drive, and then press the ( /
settings:
❖
❖
NOTE
7 To save your new settings, highlight Done, and then press the
OK button.
8 To revert to your original settings, highlight Reset, and then
press the OK button.
NOTE
®
CableClear digital Noise Reduction
The CableClear
reduce visible interference in your TV picture. This may be useful
when receiving a broadcast with a weak signal (especially a Cable
channel) or playing a noisy video cassette or disc.
To change the CableClear settings:
1 Press the MENU button to open the Picture menu.
2 Highlight Noise Reduction, and then press the OK button.
3 In the CableClear field, select your desired setting.
arrow) buttons to select either B Drive or G
B Drive: press the (
blueish.
G Drive: press the (
greenish.
The B Drive and G Drive settings are connected to the Color
Temperature settings and will change based on which setting is
selected in step 5 above.
If you select one of the factory set picture modes (Dynamic,
Standard, Movie, or PC) and then change the Color Temperature
mode, the picture mode automatically changes to Preference.
®
digital Noise Reduction feature allows you to
arrow) buttons to adjust the
arrow) button to make the picture
arrow) button to make the picture
arrow)