Remote Control Problems; Channel Tuning Problems - Toshiba 24V4210U User Manual

Integrated high definition led tv/dvd combination
Hide thumbs Also See for 24V4210U:
Table of Contents

Advertisement

150
Troubleshooting

Remote control problems

If you hear no sound, try setting the MTS feature to Stereo mode,
see
"Using the MTS button" on page
If you are not receiving a second audio program from a known SAP
source, make sure the MTS feature is set to SAP mode, see
"Selecting stereo/SAP broadcasts" on page
If you hear audio that seems incorrect for the program you are
watching (such as music or a foreign language), the SAP mode may
be on. Set the MTS feature to Stereo mode, see
stereo/SAP broadcasts" on page
If you connect a computer using either the PC IN terminal or an
®
HDMI
see."Setting the HDMI® audio mode" on page 55
Remote control problems
Remove all obstructions between the remote control and the TV.
Replace the remote control's batteries, see
page
40.
Your TV's remote control may not operate certain features on your
external device. Refer to the User's Guide for your other device to
determine its available features. If your TV remote control does not
operate a specific feature on another device, use the remote control
that came with the device, see
on page
If the TV still does not act as expected, perform the Reset Factory
Defaults procedure, see

Channel tuning problems

Ensure that the remote control is set to the correct device mode, see
"Learning about the remote control" on page
The Auto Tuning feature may have erased the channel from
memory. Add the channel to the channel memory, see
channels in memory (optional)" on page
The Lock feature may have blocked the channel. Unblock the
channel, see
If you cannot tune digital channels, check the antenna
configuration. If the problem persists, clear all channels from the
channel list and reprogram channels into the memory, see
channels in memory (optional)" on page
information, see
the problem persists, use the Reset Factory Defaults procedure, see
"Reset Factory Defaults" on page
terminal, make sure that the audio setting is properly set,
42.
"Reset Factory Defaults" on page
"Locking channels" on page
"TV stops responding to controls." on page
83.
82.
82.
"Installing batteries" on
"Learning about the remote control"
42.
52.
94.
52. For additional
58.
"Selecting
58.
"Storing
"Storing
147. If

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

24v4260u

Table of Contents