Unpacking The Machine; Putting The Machine Away - Husqvarna 6030 Operating Manual

4
Unpacking the machine
Open the carrying
case.
Grasp the machine by
the
hand wheel and under the upper arm
of
the
ma-
chine and remove
it
from the
carrying
case. Re-
move
the
electrical cord.
Lift
the
accessory box
somewhat
upward and draw
it
along the length of
the free arm.
Putting
the machine
away
Pull out the foot control plug. Wind ihe
cord
around your hand, starting
at
the control.
Press
the foot control
together and place
it
in its
com-
partment with the thick
end
down. The bottom of
the
foot control should be turned toward the
ma-
chine, and hold
the cord
in
place
beside
the foot
control
in
the compartment. Wind the other
cord
in
the same way and
put the cord
band around the
cord.
Lower the
presser
foot. Make
sure
that all
accesso-
ries are correctly placed
in
the box. Slide the
acces-
sory
box into place and
put the cord in
the
box.
Then
lift
the machine into the
case.
P1ace
the
ex-
tension plate inside the
case-lid
and the piece of
foam plastic
as
protection
between
the
sewing ma-
chine and the extension
p1ate.