Connecting A Dtv Receiver/Set-Top Box With Colorstream (Component Video) And A Vcr - Toshiba 50HP16 Owner's Manual

Connecting a DTV receiver/set-top
box with ColorStream
video) and a VCR
This connection allows you to watch DTV (digital TV), VCR, and TV
programs, and record DTV and TV programs.
Your TV has ColorStream
TV to a DTV receiver with component video can greatly enhance
picture quality and realism.
From Antenna
Stereo VCR
IN from ANT
CH 3
CH 4
From DTV
Antenna
DTV Receiver
with Component video
TV back panel
3X80501A_En_p10-17 12
®
(component
®
(component video) inputs. Connecting your
IN
OUT to TV
OUT
L R
VIDEO AUDIO
L
Y
S-VIDEO COMPONENT VIDEO VIDEO L
OUT
You will need:
• three coaxial cables
• two sets of standard A/V cables
• one set of standard audio cables
• one set of component video cables
Note:
You can connect the component video cables
to either set of ColorStream jacks on the TV
(HD-1 or HD-2.)
The ColorStream HD-1 and HD-2 jacks and
HDMI-1 and HDMI-2 jacks can be used with
Progressive (480p, 720p) and Interlaced
(480i, 1080i) scan systems.
If your DTV receiver does not have compo-
nent video, use the S-video and standard
audio connections instead. Do not connect
both an S-video and a standard video cable
to VIDEO-1 (or VIDEO-2) at the same time or
the picture performance will be unacceptable.
AUDIO
OUT For an HDMI connection, see page 14.
R
R
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
12
3/7/06, 3:50 PM