Unpacking; Connecting - Princeton VL1919 Manual

UNPACKING

Carefully lift the monitor out of the packaging and make sure that all components are included (see fig. 1).
Save the original box and packing material in case you have to ship or transport the monitor. To set up the
device, you must fit the monitor base together.

CONNECTING

➧ To connect the monitor to your PC
1. Make sure that the PC and the monitor is unplugged.
2. Connect the 15-pin signal cable to the monitor and The PC (see fig. 2)
If you have a graphic card with a digital DVI-D connector(24-pin socket), then connect one end
3.
of the DVI-D cable to the DVI-D connector of your monitor (see fi g. 2b), the other end to the
computer.
Figure 1.LCD Monitor
Figure 2.Connecting the monitor to the PC
Signal coble
5