Viewing The Cablecard ™ Menu; Viewing The Digital Signal Meter - Toshiba 42HL196 Operating Manual

Viewing the CableCARD
™
A CableCARD enables you to view encrypted digital
channels. See "Connecting a digital CableCARD
(- Installation Guide) for connection and subscription
information.
Note: Connecting your TV directly to the Audio/Video output of
your set-top-box may provide a more vivid picture.
™
After the CableCARD is inserted, a CableCARD
appears in the Applications menu, with informational
screens provided by your digital CableCARD
illustrations below).
CableCard Connected -- Acquiring
channel information.
CableCard services will only operate
with cable signal connected to Antenna 1.
To view the CableCARD
1
Press Y and open the Applications menu.
2
Highlight CableCARD
3
Press B or b to select one of the side menu items and then
press T to display the information.
Applications
Picture Viewer
Audio Player
Channel Browser
TV Guide On Screen
Digital CC/Audio Selector
CableCARD
Navigate
ENTER Select
Note: The CableCARD ™
purposes only and has no user-adjustable options.
28
Chapter 4: Setting up your TV
™ menu
™ "
™
option
™ service (see
™
menu:
and press c.
™
IP Service
Conditional Access
CableCARD(tm) Status
Network Setup
CableCARD(tm) Pairing
Back Exit
CH RTN EXIT
menu is for informational

Viewing the digital signal meter

You can view the digital signal meter for the ANT 1 and
ANT 2 digital TV input sources only.
To view the digital signal meter:
1
Press Y and open the Setup menu.
2
Highlight Installation and press T.
3
A new set of Installation menu icons will appear, as shown
below.
Open the Terrestrial menu, highlight Signal Meter,
and press T.
Terrestrial
Input Configuration
Channel Program
Channel Add/Delete
Signal Meter
Navigate ENTER Select
4
Press BbC c to select the antenna input and digital
channel whose signal you want to check.
Note: The physical digital channel number listed in the
Signal Meter screen may not correspond to a virtual TV
channel number. Contact your local broadcasters to
obtain the RF channel numbers for your local digital
stations.
Signal Meter
Signal Locked
Antenna
Physical Digital Channel
Virtual Digital Channel
To close the screen and return to the Terrestrial
menu:
Highlight Done and press T.
To return to normal viewing:
Press O.
CH RTN Back EXIT Exit
0
Peak 0
1
4
4-1
Done