Using The Stablesound ® Feature; Selecting The Optical Audio Output Format - Toshiba 42HL196 Operating Manual

Using the StableSound
The StableSound ® feature limits the highest volume level to
prevent extreme changes in volume when the signal source
changes (for example, to prevent the sudden increase in
volume that often happens when a TV program switches to a
commercial).
To turn on the StableSound
1
Press Y and open the Audio menu.
2
Highlight Audio Settings and press T.
3
In the StableSound field, select On.
Audio Settings
Bass
Treble
Balance
StableSound
Reset
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Note: The RESET function returns your audio adjustments
to the following factory settings:
Bass . . . . . . . . . center (50)
Treble. . . . . . . . center (50)
Balance . . . . . . center (0)
StableSound. . . Off
To turn off the StableSound feature:
Select Off in step 3 above.
44
Chapter 5: Using the TV's features
® feature
® feature:
100
100
0
On
Done

Selecting the optical audio output format

You can use this feature to select the optical audio output
format when you connect a Dolby Digital decoder or other
digital audio system to the Optical Audio Out terminal on
the TV (- "Connecting a digital audio system" in the
Installation Guide).
To select the optical audio output format:
1
Press Y and open the Audio menu.
2
Highlight Audio Setup and press T.
3
In the Optical Output Format field, select either
Dolby Digital or PCM, depending on your device.
Audio Setup
MTS
Language
Optical Output Format
Reset
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Stereo
English
Dolby Digital
Done