Terminal Assignment; Switch Positions - Siemens 7XV5451-0 A00 Series Operating Instructions Manual

s

Terminal Assignment

Pin Assignment
X2, Pin 1 Power supply pin 1 (L+)
X2, Pin 2 Power supply pin 2 (L-)
X5, Pin 1 Relay contact pin 1
X5, Pin 2 Relay contact pin 2
Tab.3-1: Screw-type terminals X2,X5
Page 18 of 32 Repeater 820nm / 1300nm
s

1.4.2 Switch Positions

The DIP switches can be actuated from outside.
Symbol
DC: L+ AC: L
Location of DIP switches:
DC: L- AC: N
1
2
Fig. 3: DIP switches
S1: 4 DIP switches
Switch
1
2
3
4
Tab 3-2: DIP switches
bold:
A 12/03 A 12/03
Down view
Position Meaning
open = off Light OFF in idle state
closed = on Light ON in idle state
open = off Light OFF in idle state
closed = on Light ON in idle state
offen = off not assigned
offen = off not assigned
factory setting
Repeater 820nm / 1300nm
nm Rece
Transmit
820 nm T
Page 19 of 32