Viewing The System Status - Toshiba TheaterWide 26HL66 User Manual

4
Press BbC c to select the antenna input and digital
channel whose signal you want to check.
Note: The physical digital channel number listed in the
Signal Meter screen may not correspond to a virtual TV
channel number. Contact your local broadcasters to
obtain the RF channel numbers for your local digital
stations.
Signal Meter
Signal Locked
Antenna
Physical Digital Channel
Virtual Digital Channel
To close the screen and return to the Terrestrial
menu:
Highlight Done and press T.
To return to normal viewing:
Press O.

Viewing the system status

To view the system status:
1
Press Y and open the Setup menu.
2
Highlight Installation and press T. A new set of
Installation menu icons appears, as shown below right.
3
Open the System Status menu, highlight System
Information, and press T.
Setup
Installation
Sleep Timer
PC Settings
PC Audio No
HDMI Audio Auto
Power-On Mode Power-Saving
Navigate ENTER Select CH RTN Back EXIT Exit
4
Press C c to scroll through the menu bar to select either
the Product Information or Software Version and
view the related information.
System Information
Product Information
Brand: Toshiba
Model: 32HL66
Done
To close the screen and return to the Installation
menu:
Highlight Done and press T.
20
Chapter 4: Setting up your TV
0
Peak 0
1
4
4/1
Done
System Status
System Infomation
Navigate ENTER Select CH RTN Back EXIT Exit
System Information
Software Version
2.2.26.0
Jan 24 2006 - 11:04:47
FW: 17
Done
To return to normal viewing:
Press O.
Reset Factory Defaults
To reset all settings and channels to their factory
default values:
1
Follow steps 1–3 under "Viewing the system status" at
left.
2
Press C c to scroll through the menu bar to select
Factory Defaults.
3
Enter your PIN code (or 0000 if no PIN code has been set).
4
Highlight Yes and press T. The TV will turn off
automatically after a few seconds. After the TV turns off,
unplug the TV power cord and then plug it in again to
complete the reset process.
System Information
Press YES to confirm. After the TV
turns off, unplug it and plug it back
in to complete the reset.
No
To cancel the reset:
Highlight No and press T.
Yes