Specifications - Fujitsu PRIMERGY PG-LND101 User Manual

A server blade installed with a 1Gbit/s Ethernet I/O Module and a server blade
installed with a 2Gbit/s FC I/O Module cannot be installed to the same chassis.
When a Switch Blade or a GbE Pass-Thru Blade is installed to network blade slot 3
or 4 (NET3 or 4), a FC Pass-Thru Blade cannot be installed at the same time.
1.2

Specifications

Item
Product ID
Host bus
specifications
Data transfer rate
Data transfer system
External interface
Controller LSI
Applicable model
*1: It varies depending on the PCI-X bus operation speed of the server blade daughter card slot. For example,
when PCI-X bus clock frequency is 100MHz, the data transfer speed of the 1Gbit/s Ethernet I/O Module is
maximum 800MB/sec (at peak).
Interface PCI-X bus Rev.1.0a, PCI bus Rev.2.3 (Compatible with logical
Max. 1GB/sec. (At PCI-X bus 133MHz operation) *1
1000BASE-T Ethernet (SerDes) interface (Maximum transfer speed
at the chassis internal connection is fixed to 1Gbps)
Specifications
PG-LND101
specifications) 64 bit/133MHz
Bus master, DMA
Intel(R) 82546GB, dual port
BX620 S2 Server Blade
1 1Gbit/s Ethernet I/O Module
E
49