Fujitsu PRIMERGY PG-LND101 User Manual page 46

Safety
For your safety and that of others, follow the guidelines provided on the following pages concerning
the use of this product.
WARNING
CAUTION
Check the items supplied
Before using the product, check that no supplied or attached items are missing.
If any items are missing, contact an office listed in "Appendix B Contact Information" ( pg.77).
• 1Gbit/s Ethernet I/O Module (this product)
• User's Guide (this manual)
Intel and LANDesk are registered trademarks of Intel Corporation in the USA.
Microsoft, Windows, and Windows Server are trademarks or registered trademarks of Microsoft
Corporation in the USA and other countries.
Linux is a trademark or registered trademark of Linus Torvalds in the USA and other countries.Red Hat
and all Red Hat-based trademarks and logos are trademarks or registered trademarks of Red Hat, Inc.
in the United States and other countries.
Other product names used are trademarks or registered trademarks of their respective manufacturers.
Other products are copyrights of their respective manufacturers.
All Rights Reserved, Copyright© FUJITSU LIMITED 2005
46
• Do not tinker with the product. Doing so may cause fire or electric shock.
• Keep the product away from water. Failure to do so may cause fire or electric
shock.
• When there is lightning nearby, unplug all power cords and external connecting
cords from the product. Failure to do so may cause destruction of the devices
and fire.
• Since the product is delicate, avoid using or storing it under extreme conditions,
such as excessively high or low temperature, high humidity, or in direct sunlight.
Do not bend or damage the card or subject it to extreme shock. Doing so may
cause failure or fire.
• While not in use, store the card in the bag in which it was packaged to protect it
from static electricity.