All LED AL-HBNSF150 Installation Manual

PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION
LEAVE A COPY FOR THE USER /MAINTENANCE ENGINEER FOR FUTURE REFERENCE
WARNING RISK OF ELECTRIC SHOCK
• Disconnect power before performing installation or maintenance.
• Verify that supply voltage is correct by comparing it with the luminaire label information.
• Make all electrical grounded connections in accordance with the latest edition of the National Election
Code and all applicable local code requirements.
• If the supply wire is damaged. It must be replaced by the manufacturer or its service agent or a similar
qualified person in order to avoid a hazard.
• All wiring connections should be capped with UL approved wire connections
WARNING CAUTION
• Do not dispose of electrical appliance as unsorted municipal waste, use seperate collection facilities.
If electrical appliances are disposed of in landfill or dumped hazardous substances can be damaging to
•
health and well-being.
Contact your local government for information regarding collection system available.
•
• This device is not intended for use with emergency exit fixtures or emergency exit lights.
• To reduce the risk of electrical shock, do not remove cover and caps, fitting must be grounded.
• No user-serviceable parts inside.
• Do not use when enclose is broken.
• To prevent wiring damage or abrasion does not expose wiring to edges of sheet metal or sharp objects.
WARNING RISK OF BURNS
• Do not exceed maximum wattage on luminaire label.
• Follow all manufacturer's warnings and recommendations for the driver type, mounting position, methods,
replacements and recycling.
WARNING RISK OF FIRE
• Keep any combustable and other materials that can burn away from the luminaire.
• Incorrect installation may result in electrical shock or a risk of fire.
This product supplied with a limited 5 year guarantee, subject to terms and conditions.
The manufacturer will not be deemed liable or held responsible for any damages caused
by faults or manufacturing defects that may be present in any of its products or the misuse
or incorrect installation of this device Your statuatory rights are not affected.
ENSURE POWER SUPPLY IS OFF WHEN HANDLING ANY ELECTRICAL EQUIPMENT.
Safety & Warnings
This High Bay Washdown is within the input voltage range: 100-277VAC, 50/60Hz.
•
• If input voltage exceeds this range, it may cause tube failure. Please be sure to operate under
correct input voltage.
• Ensure ambient operating temperature of (-) 20
• Using this High Bay Washdown in temperature outside of this range will reduce the High Bay
Washdown lifespan.
• Make sure to turn off power before starting the installation process.
Attention
• IP rating: IP65. Can work under wet locations.
• Please keep the High Bay Washdown away from any corrosive substance. When you clean it,
please use damp or dry cloth.
Technical Specifications
Product Code
Power
Input Current
ALL-LED USA LLC
12035 34th St N, Suite 2
St Petersburg
Input Voltage
FL 33716 USA
Frequency
Website: www.all-ledusa.com
Email: sales@all-ledusa.com
INSTALLATION GUIDE
AL-HBNSF150/50
0 C through 50 0 C
AL-HBNSF150/50
150W
1.65A
AC100-277V
50/60Hz
!
PLEASE READ
BEFORE USE!