nedis HPBT3261BK Quick Start Manual page 5

•
Do not use the headphones in a (dangerous)
place where you cannot hear the surrounding
sounds.
• Using headphones with both ears covered while
participating in traffic is discouraged and may be
illegal in some areas.
Charging the product
• Connect the power cable to A
adapter. Connect the USB adapter to a power
outlet.
4
A lights up red to indicate that the
headphones are charging.
4
A
turns off when the battery is fully charged.
Switching on the product
3
• Press and hold A
4
If the headphones are not paired within 5
minutes, they switch off.
Pairing the headphones to a
Bluetooth audio source
1. Switch on the product.
4
A
blinks red and blue to indicate pairing
mode is active.
2. Enable Bluetooth on the device you want to pair
the headphones with.
3. Select "HPBT3261BK" from the list of available
Bluetooth devices on your device.
4
When paired, A lights up blue.
4
If the headphones have been paired with
another device before, make sure that device is
switched off.
4
If the headphones lose connection to the
Bluetooth source, they will automatically
reconnect when back in range and switched on.
4
When the batteries of the headphones are
drained, you can still listen to your audio source
by connecting the headphones directly to the
audio source, using the audio cable.
Controlling the volume
1
• Press A
to increase the volume.
2
• Press A
to decrease the volume.
5
and a USB
for 3 seconds.
Controlling the music
3
• Press A
to play or pause the music.
• Press and hold A
• Press and hold A
song. Press and hold again within 2 seconds to
go to the previous song.
Making phone calls
• To answer an incoming call, press A
• To reject an incoming call, press and hold A
for 2 seconds.
• To end a call, press A
•
To quickly redial the last called number, double
3
press A .
Using Noise Cancelling
• Press and hold A
Cancelling on or off.
7
A lights up green when Noise Cancelling is
enabled.
Switching off the product
• Press and hold A
the headphones.
4
When not in use, store the product in the
provided case to avoid damage.
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the
product HPBT3261BK from our brand Nedis
produced in China, has been tested according to all
relevant CE standards and regulations and that all
tests have been passed successfully. This includes,
but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and
the safety datasheet if applicable) can be found
and downloaded via webshop.nedis.com/
HPBT3261BK#support
For additional information regarding the
compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC 's-Hertogenbosch, the Netherlands
5
1
to skip to the next song.
2
to go back to the start of the
3
.
3
.
7
for 1 second to toggle Noise
3
for 3 seconds to switch off
®
3
,