Toshiba TE2000 User Manual page 226

226
If Something Goes Wrong
Resolving a hardware conflict
The System Properties dialog box appears.
3 Click the Hardware tab.
4 Click the Device Manager button.
5 Double-click the PCMCIA adapter.
6 Double-click the appropriate PC Card.
The operating system displays your PC Card's Properties
dialog box, which contains information about your PC
Card configuration and status.
The computer stops working (hangs) when you insert a PC
Card.
The problem may be caused by an I/O (input/output) conflict
between the PCMCIA socket and another device in the system.
Use Device Manager to make sure each device has its own I/O
base address. See
page 207
Since all PC Cards share the same socket, each card is not required
to have its own address.
Hot swapping (removing one PC Card and inserting another
without turning the computer off) fails.
Follow this procedure before you remove a PC Card:
1 Double-click the Remove Hardware Safely icon in the
system tray.
2 Click Safely remove xxxx, where xxxx is the identifier for
your PC Card.
The operating system displays a message that you may
safely remove the card.
3 Remove the card from the slot.
"Fixing a problem with Device Manager" on
for more information.