Toshiba M5 User Manual page 90

90
Getting Started
Turning off the computer
2 Click the Toshiba Power Saver icon.
3 Click the Setup Action tab.
4 Select Hibernation for the options you want.
5 Click Apply.
6 Click OK.
NOTE
Once the computer is configured, you can place it into
Hibernation mode by either pressing the power button or
closing the display panel, depending on the Hibernation
options set.
Starting again from Hibernation mode
To start up the computer from Hibernation mode, press the
power button until the on/off light glows green. The computer
returns to the screen(s) you were using.
If you put the computer in Hibernation mode by closing the
display panel, you can start it again by opening the display
panel.
When I press the power button
Set this option to Hibernate if you want the
computer to go into Hibernation mode when you
press the power button.
When I close the lid
Set this option to Hibernate if you want the
computer to go into Hibernation mode when you
close the display panel.
For more information about the Power Saver utility, see
"TOSHIBA Power Saver" on page 182.